Indoor and outdoor installation LED

1) indoor display installation
hoisting
Indoor load-bearing concrete roof can be used for standard hanging, boom length depending on the site situation. The steel beam is used for lifting the steel beam, and the outer sleeve and the screen body are in the same color.

Mount
Ordinary mount: applicable to the total weight of less than 50kg screen display, can be directly hung on the walls, leaving no space for maintenance, schematic diagram as follows:

Rotary bracket hanging:
Applicable to the weight of more than 50kg, the screen height and width are greater than 1200mm of the display screen, must be installed in the load-bearing wall, because of its larger size, difficult disassembly and assembly, so through the screen to solve the maintenance of rotation
Space.
Insert
Insert structure is the hole in the wall, the display is embedded inside, the requirements of size and screen frame size match, and make the appropriate decoration, for ease of maintenance of the hole wall must be communicated, otherwise
Need to use before the demolition mechanism.

2) outdoor display installation
Outdoor LED display area is larger, the design of the steel structure to consider the basis of wind load, magnitude, waterproof, dust-proof, environmental temperature, lightning and many other factors. Steel structure should be placed in the distribution cabinet, air conditioning, shaft
Flow fan, lighting and other auxiliary equipment, but also a ladder, road maintenance facilities etc.. The outdoor screen structure to meet the following IP65 protection level.
Mount
Seat.
Install outdoor screens on platforms or columns. The column is divided into columns and double column, in addition to the need to produce screen body steel structure, but also need to make concrete or steel column, the main consideration of the geological conditions.