The operation of a computer directly connected to a network card

1. Connection schematic diagram

   

2. Control card factory set up IP:192.168.1.189,By default, the IP is automatically allocated for the computer, so when the computer IP is set to automatically get the IP address，click“Determine”.

   

3. If the computer IP does not automatically get the IP address, please set up the IP of the computer first：192.168.1.x(x is set to a number that is not 252, and the IP of the computer and the IP of the control card are set in the same segment).，The following diagram，click“OK”that will do

   




Note: 2 and 3 choose one of these settings.




4. open“FKShow”。

5. click“Setting”Choice“Display setting”。(password: 168)

   

6. Choice“Control Card”，Choice“Commu.Mode”，Choice“Direct Connecting”，Select complete clicks“Control Card Detect”。

   

7. Control card detection success，clickNext。Set the corresponding screen, set and click“Load”。

   Smart scan use details please click：Detailed steps of network card intelligent scanning

   

8. “Load the screen to complete!”，click“Finish”. Edit the program content, add subtitles, text, pictures, weather forecasts, forms, dates, animations, etc..

   Program editor completes clicks"Send""Single display"。

   

9. “Data transmission is successful!”。